After downloading the first version of the trial "Ten", many users began to complain about the sign in the right corner of the screen. The inscription said that Windows 10 requires activation. In this case, everything works fine, but over time this notification begins to irritate. Many owners of the new operating system had guesses that a special file in the labyrinth of system folders was responsible for the watermark. Some people came to terms with this phenomenon and began to wait for the release of the final version of Windows 10, while others were satisfied with the trial version and began to look for ways to help remove the annoying sign.
The guesses of many users turned out to be truly true; an inscription indicating that this is a trial version of the OS “lives” in the system folders (files shell23.dll.mui, as well as basebrd.dll.mui). It should be taken into account that simply deleting files can harm the performance of Windows 10. To remove the inscription correctly, you need to use a special program. This is not at all difficult and does not take much time.
In order for the watermark to disappear and the right side of the computer screen to be clean, you need to install the Universal Watemark Disabler utility on your Windows 10. The program will allow you to remove warnings in different versions of Microsoft operating systems (including Windows 10). To be on the safe side, experts recommend creating a restore point.
To make this sign disappear from your desktop, you need to perform just a few simple steps:
Benefits of the program
The official version of the Watemark Disabler program gives the user several advantages:
- The watermark can be removed on the newest OS (Windows 8 to 10).
- You can work with operating systems in different languages.
- The application does not harm system data in any way.
- At the same time, the text about the test mode, the build line, and other video marks are removed.
On the screens of those computers that use an unactivated version of Windows 7 or the activation failed after the update, the following message is displayed: "Your copy of Windows is not genuine" or a message of similar meaning. Let's figure out how to remove the annoying notification from the screen, that is, disable authentication.
There are two options for disabling authentication in Windows 7. Which one to use depends on the user's personal preferences.
Method 1: Editing the Security Policy
One of the options for solving this problem is to edit the security policy.
- Click "Start" and go to "Control Panel".
- Open section "System and safety".
- Follow the inscription "Administration".
- A list of tools will open in which you should find and select "Local politics...".
- The Security Policy Editor will open. Right click ( RMB) by folder name "Restricted Use Policy..." and from the context menu select "Create a policy...".
- After this, a number of new objects will appear on the right side of the window. Go to the directory "Additional Rules".
- Click RMB on an empty space in the directory that opens and select the option from the context menu “Create a hash rule...”.
- The rule creation window opens. Click the button "Review…".
- A standard file opening window opens. In it you need to go to the following address:
C:\Windows\System32\Wat
In the directory that opens, select the file called "WatAdminSvc.exe" and press "Open".
- After completing these steps, you will be returned to the rule creation window. In his field "File Information" The name of the selected object will be displayed. From the dropdown list "Security level" select value "Forbidden", and then press "Apply" And "OK".
- The created object will appear in the directory "Additional Rules" V "Security Policy Editor". To create the next rule, click again RMB on an empty space in the window and select “Create a hash rule...”.
- Again, in the rule creation window that opens, click "Review…".
- Go to the same folder called "Wat" at the address given above. This time select the file with the name "WatUX.exe" and press "Open".
- Again, when you return to the rule creation window, the name of the selected file will be displayed in the corresponding area. Again, select the element from the security level selection drop-down list "Forbidden", and then press "Apply" And "OK".
- The second rule has been created, which means that OS authentication will be disabled.
Method 2: Deleting files
The problem posed in this article can also be solved by deleting some system files responsible for the verification procedure. But before that, you should temporarily disable the standard antivirus, "Windows Firewall", remove one of the updates and deactivate a specific service, since otherwise problems may occur when deleting the specified OS objects.
- After you have deactivated your antivirus and "Windows Firewall", go to the section already familiar from the previous method "System and safety" V "Control Panels". This time open the section "Update centre".
- A window opens "Update Center". Click on the inscription on the left side of it "Viewing the log...".
- In the window that opens, click on the inscription to go to the update removal tool "Installed updates".
- A list of all updates installed on your computer will open. You need to find an element in it KB971033. To make your search easier, click on the column title "Name". This will list all updates in alphabetical order. Search in a group "Microsoft Windows".
- Having found the desired update, select it and click on the inscription "Delete".
- A dialog box will open where you need to confirm the removal of the update by clicking on the button "Yes".
- After the update is removed, you need to disable the service "Software Protection". To do this, go to the section "Administration" V "Control Panels", which has already been discussed when considering Method 1. Open element "Services".
- Starts "Service Manager". Here, just as when deleting updates, you can arrange the list items in alphabetical order for ease of finding the desired object by clicking on the column name "Name". Having found the name , select it and click "Stop" on the left side of the window.
- The service responsible for software protection will be stopped.
- Now you can proceed directly to deleting files. Open "Conductor" and go to the following address:
C:\Windows\System32
If the display of hidden and system files is disabled, then you must first enable it, otherwise you simply will not find the necessary objects.
- In the directory that opens, find two files with a very long name. Their names begin with "7B296FB0". There won't be any more objects like this, so you can't go wrong. Click on one of them RMB and select "Delete".
- After the file is deleted, do the same procedure with the second object.
- Then return to "Service Manager", select the object "Software Protection" and press "Run" on the left side of the window.
- The service will be activated.
- Next, do not forget to enable the previously deactivated antivirus and "Windows Firewall".
As you can see, if your system activation has failed, then it is possible to disable the annoying Windows message by deactivating authentication. This can be done by setting a security policy or by deleting some system files. If necessary, everyone can choose the most convenient option for themselves.
How to disable windows activation offer
Hello everyone, in this article from Computer76 I will show you how to quickly get rid of the system prompt to activate an installed copy and disable the windows activation prompt.
Windows activation is the process of checking an installed copy for authenticity. Activation has only one meaning - to make sure that the copy is used on the number of computers that are covered by the license rules.
A little about licensing. Windows has several types:
Licensed: This is exactly the status you will see after activating a system purchased in good faith. You will most likely never need to disable the windows activation setting.
Grace period (graceful): the time when the license has not been paid, but the rights of the copyright holder (that is, Microsoft) have not been violated. This is usually the familiar 30-day trial or trial period. After it, the copy will be limited in functionality or will be automatically activated. The last option is unfamiliar to individuals. This function may not be included in the build, but it does exist in corporate versions.
Additional grace period: in case of replacement or installation of additional equipment that is not invisible to Windows, the grace period can be increased. Both previous cases can be used as an example of how to disable the activation setting.
Reminder period. Follows the two just described. Accompanied by continuous offers to activate the copy.
Extended period for unregistered copies. Windows is confirmed to be unregistered, but the user is given time to register a copy or transfer data to other media. You never know, they say. Human rights, all that...
Unregistered copy. Well... no comments.
So, all the last (except for the first point) options are our case when we try to disable the windows activation offer.
Is it possible to disable the Windows activation prompt and not go through the procedure itself?
No, my dears. This article contains information only on how to get rid of the activation offer. The countdown started after the launch will continue and hour X is imminent. But you can read in the article how to comfortably extend the life of Windows.
How to disable the windows activation offer in Windows Vista\7\8 operating systems?
For Windows 7\8, you can disable the activation offer like this:
- Press combination Win+R and enter the command regedit
- In the Registry Editor window that opens, find the hive:
On the right side of the editor window, find dword parameter with value Manual. Your value is 0 – automatic activation is enabled. Let's change it (the parameter) and give it a value of 1. As in the figure below:
Now you need to close the editor and restart your computer.
If you have Windows Vista, in the registry, to disable the activation setting, you will have to find this branch:
HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SL\Activation
We also change the Manual parameter, assigning it the value 1.
P.S. There have been cases where such manipulations did not work. You may need to work with the parameter NotificationDisabled assigning it the value 1.
Read: 2,217
Verifying the authenticity of the Windows operating system (Windows activation) is a procedure that checks the presence of original files in the operating system and the license itself (including the key that was entered when installing the OS). If the operating system does not pass such a test, then the user’s capabilities when working with the computer are significantly reduced. Usually, when the operating system fails the test, a corresponding message appears in the far right corner of the desktop.
The most popular way
There are several reasons for this message to appear and several ways to solve it. Firstly, not all personal computer users can afford to buy a licensed version of the operating system, since one disk can cost more than five thousand rubles. If a licensed copy is not installed on your computer, you must first disable the OS update service. If, however, this service was not disabled in time and a black screen appeared, indicating that the copy of Windows did not pass authentication, then you need: KB971033 and KB915597. In order to find them and delete them, you need to right-click on “My Computer” and select “Properties” from the context menu. In the properties, the user must select “Windows Update” and go to the “Installed updates” tab. A whole list of all updates that have ever been installed and are still in use today will appear here. Using a search, you need to find messages like: “Update for Microsoft Windows KB915597” and “Update for Microsoft Windows KB971033”. It is worth noting that the first update is used by the standard Windows Defender, which is similar to antivirus software. These updates must be highlighted and deleted using the appropriate button.
Disabling services and special software capabilities
In addition, the problem may also be with the sppsvc service. As a result, it must be found and disabled. This can be done in the “Administration” menu, which is located in the “Control Panel”. When the “Administration” window opens, you need to go to the “Services” tab and use the search to find sppsvc. When it is found, it must be disabled (the “Stop” button). As a result, the computer needs to be restarted and the problem should be resolved.
It is worth noting that there is a special program with which you can remove the Windows activation window - RemoveWAT21. This small program is capable of solving a pressing problem in all possible ways (of which there are many). It can either work with updates, or with the registry, etc. In order to get rid of the activation window, you just need to download RemoveWAT21 and click the special “RemoveWAT” button. After restarting the computer, the operating system activation window will disappear. If necessary, you can restore the original data using the “Restore WAT” button.
After installing the Windows Seven operating system, you may see the message “Your copy of Windows is not genuine” on your screen. This means that you did not activate the system. Without activating the system, you will not be able to use it for more than 30 days, and the functional component of the system will be significantly reduced: downloading critical updates, technical support from the developer, etc.
You will need
- Windows Seven operating system, mobile phone, Internet connection.
Instructions
To complete this you will need your system key. This key can be found on the installation box, system unit case or. If the operating system was purchased, take a look at the developer's website. If you have problems entering the key, contact Microsoft Help Desk.
When the activation program starts, Windows Seven automatically searches for an Internet connection. As soon as this type of connection is established, the program will report a successful connection. Click the Start menu, right-click Computer, select Properties, then Activate Windows.
Select the "Activate Windows over the Internet" option. Enter the administrator password to activate the operating system as an administrator. Click the “Next” button and follow all the instructions that will appear in the system activation windows.
If there is no connection to the Internet, use activation by phone. Open the Windows Activation component, select Show other activation methods. Then specify the Windows Seven key, click the “Next” button. Click on the “Use an automated telephone system” button. Select the closest location to your location, then click Next.
Dial one of the phones presented, and the Windows Seven operating system activation system will provide detailed instructions for further activation. If you were unable to complete the activation, wait for the operator to respond, he will help resolve your problem.
Video on the topic
Before using the installed Windows XP OS, you must activate it. This procedure guarantees the use of a licensed copy of the product on a specific computer, and is also intended to reduce the level of illegal copying and installation of pirated versions of the OS. To activate the installed operating system, you can use one of three available methods.
Instructions
Activation via the Internet.
2. Click the “Yes, activate Windows online” button.
4. In the window that opens, you must perform one of the following actions:
To activate and register a copy of Windows at the same time, click Yes, Register and Activate Windows and the Windows Registration Privacy Agreement, then click the Back and Next buttons. Fill out the registration form and click “Next”;
To simply activate Windows (without registering it), click "No, don't register, just activate Windows," then click the "Next" button.
Activation by .
1. Open the “Windows Activation” window by left-clicking on the corresponding tray icon or using the “Start” menu.
2. Click the “Yes, activate Windows” button.
3. Click Windows Activation Privacy Statement, then the Back and Next buttons.
4. The “Windows Activation by Phone” dialog box will appear, in which a toll-free number will be indicated: do everything according to the instructions in this window and click the “Next” button.
5. Once activation is complete, click OK.
The third activation method is carried out using a modem; it is completely similar to the activation method via the Internet and differs only in that it is performed after first disconnecting from the Internet.
note
The activation method via telephone will be automatically proposed in case of unsuccessful activation via the Internet or modem.
When purchasing a new personal computer or laptop, it usually includes licensed software, including the Windows operating system already installed. When the desktop boots, its beautiful logo and name appear on it. If you want to change this branded wallpaper, then you need to learn how to remove the Windows message on your desktop.
Instructions
Right-click on the desktop. A small window will appear with a list of commands. If you have one of the latest versions of Windows OS installed - Vista or 7, then select the bottom service "Personalization". In earlier releases of Windows (98, 2000, NT, XP), this service is called “Properties”. You can also access the “Personalization” section through the “Start” menu - “Control Panel”, after which a new service window will open. There you can customize the color and appearance of your windows, your screen saver, sounds and other themes, and, of course, your desktop background.
Go to the "Desktop Background" tab. Another new window will appear, “Select a desktop background”, where you will need to specify an image or background that will decorate your computer screen. Click the Browse button to choose the wallpaper you want. This can be any picture you like, either from any file folder on your computer or from a folder contained on a removable device - a flash drive, disk, floppy disk. Click the “Open” button, after which the background image will load into the central field of the “Select desktop background” window.
In the lower field, specify the options for placing the picture on the desktop - “Stretch”, “Tile” or place “Center”. If necessary, use the “Change background color” function. It looks like a text link, which is located in the lower right corner of the service window. At the very end, click OK to save the settings. Return to your desktop. Instead of the branded Windows logo, you will now be pleased with colorful wallpapers. And the main thing is that you picked them yourself!
As for working in older versions of the Windows operating system (98, 2000, NT, XP), the desktop properties there are changed in a similar way in the “Properties” service. In the Properties folder, the names of the tabs and their location within the window are slightly different from those in the Personalization folder. Before changing your desktop picture, please note that the branded wallpaper with the inscription “Windows” looks very modern. It is better not to change them if you work in the electronics industry. This will highlight the novelty of your technology.